Start a conversation

TAURI+ReAX

  • TAURI environmental calibration

    TAURI tablets come factory calibrated from the factory. However, variations in environmental conditions do have the potential to impact readings. The calibration process requires that your TAURI table...

  • Configuring email alerts with TAURI

    Once you have installed the latest firmware from the Aurora Customer Portal, navigate to the web page of the TAURI (http://ipaddress/setup). Log in with the default username and password (admin), then...

  • Restoring TAURI to factory default settings

    In order to reset your TAURI tablet to its factory default settings, swipe your finger all the way from the left side of the screen to the right side of the screen. When the password prompt appears, e...

  • Updating TAURI firmware via FTP

    Connect to TAURI using an FTP client such as Filezilla, or by following this guide on your PC. In this example TAURI’s IP is 192.168.1.18. You can find your TAURI’s IP address on the WiFi or Ethernet ...

  • Updating TAURI firmware with a USB flash drive

    To update to the latest firmware via USB, here is the process: Copy the update OTA zip file from the Aurora Customer Portal to a USB drive and plug it into the unit. Swipe all the way from the left ed...